In Modern Soapmaking, especially in hot process tutorials and liquid soapmaking tutorials, one of the most frequently asked questions is how to pH test handmade soap.We can understand why when there is so much conflicting information on the internet when it comes to pH testing soap!


In this article, I hope to clear up a lot of common misconceptions about testing pH of handmade soap. I will include information and examples for different kinds of soap in this article!

What is pH anyhow?

A pH measurement measures the concentration of hydrogen ions in an aqueous solution (water).High concentrations of hydrogen ions result in a low pH, while low concentrations result in a high pH. The lighter and more durable tables are designed to be easily stored or to withstand outside weather conditions.There are also tables that look so good -- and are so engaging to play on -- that you will want them to be on permanent display.


.It was a while ago that Kevin Dunn asked the handmade soapmaking community to please send him a soap of pH 7 or lower, and as far as I know, no one was able to.

Important Notes about pH Testing Soap

There are two key points I want to jump into here, before we start talking about pH testing soaps.

First, it"s important to keep in mind that pH is a measurement of hydrogen ions in an aqueous solution. It is not a measurement of hydrogen ions in whatever substance you feel like measuring! Obviously, when you are looking at bar soap, it"s a relatively solid material - not an aqueous solution. In order to properly test the pH of a bar soap, you should attempt to use a solution. (We"ll get more into that later on.)

The second important note is that pH is not a direct relationship to how harsh or mild a product is (whatever that means in the first place!) When it comes to skin chemistry, a common misconception is that your skin has a pH - it doesn"t, your acid mantle does. The acid mantle can have a varying pH between 4.5 and 6.2, depending on your ethnicity, age, and gender, as well as the area of the body, the humidity, and various other factors. Your acid mantle acts as abarrier on top of your skin that helps discourage the growth of fungi and bacteria.

In general, brief exposure to slightly acidic or slightly alkaline material (like using handmade soap, which is slightly alkaline) does not harm the acid mantle. Healthy skin can rebalance the acid mantle in a very short amount of time (in as little as15 minutes to as long as 90 minutes). Long-term or prolonged exposure (such as applying a high pH product to your skin and leaving it on for hours) can cause damage, just as exposure to extremely acidic or extremely alkaline (like sodium hydroxide) material can.

Even if you wash your skin with tap water (typical pH between 6 and 8.5 depending on the source) and no soap or cleanser at all, the pH of your acid mantle will slightly increase immediately following washing. (In a study of infants, water-only washing sees a pH rise of 1.1 while alkaline soap, like handmade soap, sees a rise of 1.2 points.) Furthermore, there are plenty of high pH products on the market thatare less irritable to the skin than lower pH products! (One study found that Johnson"s Baby Oat soap, with a pH of 12.35, was the least irritating soap tested, while another soap with a pH of 9.36 was the most irritating.)

The recent onslaught of "pH-balanced" skin care products is largely a marketing ploy. So, pH should not be viewed as an indicator of whether or not a product is irritable to your skin unless it is being applied for hours at a time or has an extremely acidic or alkaline pH that could cause damage.

Well, what"s the point of pH testing soap then?

A lot of soapmakers attempt to use pH testing soap as a indication of excess alkali, and this is flawed for a few reasons.

First, unless a soap contains a large amount of excess alkali, it could test within a "normal" pH range for handmade soap (between 8 and 10). And, if given enough time to cure, lye-heavy soap could eventually test normal as carbon dioxide works its magic onfree alkali. (Fun fact: sodium hydroxide + carbon dioxide = sodium carbonate, which is soda ash!)

Plus, if you pH test handmade soap fresh out of the mold the soap could be unfinished. Saponification may not be fully complete. How quickly a properly made soap saponifies depends on the oils used (or the fatty acid profile of the formula), as well as the temperature of the soap and the environment, and can range from as little as 24 hours to multiple weeks.

The second reason using pH testing soap as a indication of excess alkali can be flawed is that soap can saponify unevenly. For instance, the middle of a batch of soap typically saponifies quicker, if gelled, while the exterior edges don"t saponify as quickly. The top of a batch of soap could be slightly more alkaline, as the water (which carries the lye) evaporates out of the soap. Or in such cases of lye-heavy soaps, the lye solution or undissolved lye crystals can concentrate in pockets or specific areas in the final soap. Unless a soapmaker pH tests soap in just the right area, they could come out with a rating that ignores the presence of excess alkali.

Does this negate the usefulness ofpH testing handmade soap?Yes and no!

It"s much easier to identify lye-heaviness through visual cues, like the presence of liquid pockets or crystallization, rather than pH testing soap. If there is an unknown liquid or substances seeping out of a soap, a pH test can help you identify if the liquid is lye solution or separated oil, fragrance, or another additive. pH testing handmade your soap to confirm a suspicion when troubleshooting is the first step in knowing how to correct it.

Essentially, pH testing your soap show an abnormally high pH, then you know you need to either neutralize or continue cooking the soap (in the case of liquid or hot process soapmaking), or rebatch it (in the case of cold process soap). To neutralize or rebatch soap, you must first figure out how much excess alkali is present - either by reviewing your procedure (hence why it"s important to check/calibrateyour scale, detail your process, and use self-check measures to ensure accuracy) or titration to measure alkalinity. Scientific Soapmaking and Liquid Soapmaking are two books that detail the entire titration process!

Another way pH testing handmade soap can be useful is if you sell your soaps and want to adhere to good manufacturing processes. Conducting a pH testis one of many ways to conduct quality control, ensuring that your products fall within a specific range of "normal". However, pH testing your soap should not be used as the sole quality control measure, as it can be unreliable.

And finally,let"s be realistic here, pH testing your soap satisfies curiosity and can be useful in understanding the chemistry behind saponification! If you ever get the urge to make multiple soaps with single oils, pH test them during the curing period every week to see how they change. Various saponified oils (and individual fatty acids) have differing pH levels, and the pH doestend to slightly drop over time.

The Do"s and Don"ts of pH Testing Handmade Soap

If you do want to pH test your soap, it"s important to start off on the right foot. When I was in the process of researching this article, I came across tons of blog posts and how-to videos out on the internet that gave instructions for pH testing handmade soap. Here"s a rundown on some of the most common instructions I found:

Using Tongue Testing or Zap Testing to Check Soap Alkalinity

I found that one of the most common ways to check the soap pH is to touch the bar to your tongue.Whenever a soap zaps your tongue as if you were holding it to a battery, you know you're handling a lye-heavy soap.The presence of free alkali does not actually indicate the pH level of soap, but it does indicate the presence of free acids. As far as I know (and have been able to find scientific evidence), it is impossible for a handmade soap to fall near neutral or below without using an emulsifier to hold the soap molecules together. I know that soapmakers claim that they can or do create neutral pH soaps, but the products are not usually true soaps since they are derived mainly from alkali salts of fatty acids.


.As a result, GMP encourages robust testing and quality control among other processes, and while tongue testing accomplishes the objective, it is unhygienic and dangerous.A worker is at fault if poor manufacturing practices cause them to suffer an injury, so you are responsible for any injuries sustained.

Using pH Strips to Test Soap pH

The next most common method of pH testing soap I found online was using pH strips. Most of the tutorials and how-to instructions I came across were a variation of the following:


The first problem with pH strips is that the nature of soap interferes with the indicator dyes used to manufacture the strips, which can throw the reading off by several points. (In my testing, pH strips gave me a reading varying from a pH of 5to a pH of 9 - a hugerange!)

The second issue with this method of pH testing soap is that the process of putting water on the surface and rubbing it until it lathers creates a huge variable. How much or how little soap is dispersed in the water can affect the reading of the pH. None of the instructions detailed creating a definitive solution containing a specific ratio of soap to water. Some of the tutorials even negated specifying what kind of water to use! (As we mentioned earlier, tap water can vary a lot and throw off the readings.)

If pH strips are all you"ve got and you are eager to pH test your soap, using a specific solution and higher quality pH strips will help get some of these variables under control. (We"ll talk about how to do that in a minute!) That being said, using pH strips is not the most ideal method of checking a soap"s pH.

Using Phenolphthalein Drops to Test Soap pH

Phenolphthalein drops are most commonly recommended for testing liquid soap and hot process soap during the cook to identify whether the soap is "done" or if the soap needs to be neutralized. And while phenolphthalein drops can kind of serve that purpose, most of the tutorials and instructions I found directed you to place the drops directly on the soap. Pure soap, whether it"s liquid soap paste or hot process soap, isn"t an aqueous solution. And phenolphthalein drops, like other methods for pH testing soap, should be used in a solution.


The main issue with phenolphthalein drops is how they work as a pH indicator. When added to a solution, phenolphthalein changes from clear to pink, depending on the pH of the solution. The initial color change from colorless to pale pink happens at a pH of 8.2, and deepens to a dark fuschia as the pH rises to 9.8. If used in a solution with a higher pH, they remain bright deep pink.


.Occasionally, it is useful to titrate a soap solution to measure alkalinity, as in the case of instructions to neutralize liquid soap. Since pure soaps as a rule have an alkaline pH between 8 and 10, phenolphthalein drops do not necessarily act as a guarantee of finished cooking or safe use of the soap. A liquid soap with a pH of 8.1 and a liquid soap with a pH of 8.3 (which crosses the color lines for phenolphthalein drops) will not appear to perform tremendously differently as a basic cleanser.Furthermore, soap with a pH of 10 (which is normal) will test exactly the same as soap with a pH of 13 (which is not normal).

How to pH Test Handmade Soap

Now that we"ve talked about all the issues with pH testing soap, let"s get down to business with how to pH test soap in the most ideal way.

To do this, let"s turn to a source for professional standards, ASTM International (American Society for Testing and Materials International). They are an international organization that develop and publish technical standards for a wide range of materials, products, systems, and services. And luck would have it that they have a standard for exactly what we need: ASTM D1172 - 15(Standard Guide for pH of Aqueous Solutions of Soaps and Detergents).

Now, I would guess that most of us do not have the fancy equipment that the standard dictates for pH testing soap. (It recommends using aFischer Accuphast combination electrode or Orion Ross Sure Flow electrode.) However, it is possible to follow the standards in procedure relatively closely!


To put this to work, I"m sharing pH testing results using a variety of methods/pH testers on a bar of soap that is three daysold (relatively fresh, but should be mostly saponified at this point). The bar of soap is from the middle of the loaf, and partially gelled. There are no obvious signs of separation or excess alkali.

Here"s the list of pH testing materials:

The first steps described in the standard is preparing the reagent, listing distilled water or equivalent, by removing the carbon dioxide by boiling or purging with carbon dioxide free air. The standard instructs toprotect the distilled water with soda-lime or soda-asbestos while cooling and in storage.The next steps in the standard explain making a soap solution, and bringing it to an accurate temperature for pH testing.

My goal here is to follow the standard as closely as possible while still being practical for a handmade soapmaker, so let"s dive in:

First, I boiled my distilled water, which will serve two purposes: help eliminate carbon dioxide and help dissolve the soap. Next, I shaved pieces of the soap from the side of the bar, from top to bottom, using a paring knife,into a clean disposable cup.

I"m aiming for a1% soap solution, meaning 1% of the solution is soap and 99% of the solution is distilled water. To make it easy, I weighed approximately 1 gram of soap and 99 grams of distilled water on my American Weigh Scale (AWS-100). (I use this scale more often for blending essential oils and other tiny tasks, it"s pretty handy and affordable!)


Next, I added thedistilled water, with a temperature reading of about 70° C (158° F), to a glass mason jar and then added the soap shavings. (The distilled water is still hot from boiling! As I mentioned, it was boiled directly beforehand.) Using a mini-whisk, I stirred the solution until the soap dissolved.


The standards mention that you should conduct the pH test at 40° C (plus or minus 2° C), which isabout 104° F and that the solution should be rapidly cooled.To do so,I placed my mason jar is an ice bath and kept an eye on the temperature while I prepared the pH testing materials.

Each one of the pH testing materials Iused came with varying levels of instructions for accurate readings, so I defaulted to each individual one for instructions. For instance, some pH testing strips say to submerge the strip for 30 seconds while others say to "dip the strip" in the solution.

Here"s the results of pH testing my soap with various methods:


Alright, so pH testing soap is all sorts of crazy..

After all this research and work, I have a few key takeaways about pH testing soap, whether it"s cold process, hot process, or liquid soap. Here"s the quick hit list:

pH strips are terrible.both for this article and in the pastpH testing soap is largely inaccurate.where tiny littlesoap molecules are suspended in waterpH testing soap isn"t as usefulas many soapmakers think it is. if your soap pHreads higher than it should, give it time.both liquid and barsoapthen

When it comes down to it, I know that soapmakers are going to pH test soap however they prefer (including that pesky tongue test!) However, I hope by working through the rundown on pH testing handmade soap, I"ve given you some food for thought and other options. Leave a comment down below, and let me know if you learned anything new or what you think!